My title

760.738.4084

N62 & N62-TU Valve Stem Seal Tool Kit

N62 & N62-TU Valve Stem Seal Tool Kit

Problem

You have a smoking BMW due to bad valve stem seals. The valve stem seal problem is that the old valve stem seal becomes hard over time and doesn’t provide the proper seal between the seal and stem. This allows oil to pass through and enter the combustion chamber and exhaust. The oil consumption here is bad for a lot of different reasons. Obviously smoking, but also decreased catalytic converter life. We’ve seen a number of cars that have set CAT inefficiency codes and these codes can go away if you replace the seals if done in time.

Solution

Use the AGA N62 Valve Stem Seal Tool Kit. Perform the Valve Stem Seal Repair without removing the engine, cylinder heads, or cams. This repair not only saves you hours of labor, but also eliminates having to have thousands of dollars invested in cam timing tools. This is one of the few tools a shop can buy and recover the cost already on the 1st job performed.

Benefit

Eliminates smoking from the exhaust, reduces risk of damaging cat converters and plugging the secondary air injection. It also allows the car to pass Smog. No need to remove Intake or exhaust cams or buy expensive valve timing tool. There is no longer a risk of setting the cam timing incorrectly. Plus, you have the assurance of being able to sell the valve stem job to the customer, rather then having them go to another shop for the repair.

NOTE: Valve Keeper Installation Tool is included with the Valve Stem Seal Tool Kit

  1. N62 Valve Stem Seal Master’s Collection

    N62 Valve Stem Seal Master’s Collection

    • The N62 Master’s Collection includes our most popular products: the N62 valve stem seal tool kit, the N62 chain lock, seal pliers, and the valve stem seal installer.
    • This special value kit is offered at a discount, a savings of almost $50 when compared to the cost of buying these tools individually.
    Price: $990.00
    View Product Details
  2. N62 Chain Lock Tool

    N62 Chain Lock Tool

    • AGA Tools has manufactured a N62 Chain Lock Tool to prevent the engine from turning over during a valve stem seal repair.
    • By setting the engine to TCD and pressuring the cylinder, if the TDC is not perfectly aligned the engine can turn over in either direction. Our N62 Chain Lock Tool will prevent this from happening. Before the cylinder is pressurized, insert the chain lock tool to lock the chain and inhibit it from turning over.
    Price: $129.00
    View Product Details
  3. Valve Stem Seal Pliers

    Valve Stem Seal Pliers

    • All German Auto has manufactured custom pliers to make the removal and installation of valve stem seals quick and easy for any engine.
    • Our Valve Stem Seal Pliers have the perfect diameter to grip tightly around the stem seal and provide better traction when pulling the stem seals off.
    Price: $49.00
    View Product Details
  4. N62 & N63TU Valve Seal Installer

    N62 & N63TU Valve Seal Installer

    • Designed for N62 & N63TU engines, the shorter length helps technicians effortlessly slide valve stem seals in place.
    • The Valve Seal Installer is magnetic, making it easy to retrieve the tool should you accidentally drop it in the engine.
    Price: $18.00
    View Product Details
  5. N62 Valve Stem Seals and Gasket Kit

    N62 Valve Stem Seals and Gasket Kit

    • If you already have our N62 Valve Stem Tool Kit, here are the valve stem seals and the gaskets we recommend using on future jobs.
    Price: $292.00
    View Product Details
  6. Valve Stem Seals

    Valve Stem Seals

    • If you already have our N62 Valve Stem Tool Kit or N63 Valve Stem Seal Tool Kit, here are the valve stem seals we recommend using on future jobs. This kit includes 32 Elring valve stem seals.
    Price: $144.00
    View Product Details
  7. N62 Valve Stem Seal Kit Case Only

    N62 Valve Stem Seal Kit Case Only

    • If you’ve already purchased our N62 Valve Stem Seal Kit, here is a padded case for keeping everything together.
    Price: $96.00
    View Product Details

Problem

You have a smoking BMW due to bad valve stem seals. The valve stem seal problem is that the old valve stem seal becomes hard over time and doesn’t provide the proper seal between the seal and stem. This allows oil to pass through and enter the combustion chamber and exhaust. The oil consumption here is bad for a lot of different reasons. Obviously smoking, but also decreased catalytic converter life. We’ve seen a number of cars that have set CAT inefficiency codes and these codes can go away if you replace the seals if done in time.

Solution

Use the AGA N62 Valve Stem Seal Tool Kit. Perform the Valve Stem Seal Repair without removing the engine, cylinder heads, or cams. This repair not only saves you hours of labor, but also eliminates having to have thousands of dollars invested in cam timing tools. This is one of the few tools a shop can buy and recover the cost already on the 1st job performed.

Benefit

Eliminates smoking from the exhaust, reduces risk of damaging cat converters and plugging the secondary air injection. It also allows the car to pass Smog. No need to remove Intake or exhaust cams or buy expensive valve timing tool. There is no longer a risk of setting the cam timing incorrectly. Plus, you have the assurance of being able to sell the valve stem job to the customer, rather then having them go to another shop for the repair.

NOTE: Valve Keeper Installation Tool is included with the Valve Stem Seal Tool Kit